MR33 Tire Roller 1:10 Ride FWD Tires 36086S

The MR33 tire roller is used to prepare your racing tires.
As you probably know, many drivers "roll" their new tires over the setup board with a little pressure before their first use.
This process serves to "break" the superglue in places where too much tire glue may have been used.
Rolling also flattens the tire insert, which slightly increases the air gap (the gap) between the insert and the tire rubber.
Simply using an Allen key or other tool for rolling won't allow for even pressure.
You'll also end up pressing directly on the edge of the hole through which the wheel axle will later be inserted, which can distort the hole—anything but perfect!

The 3D-printed MR33 tire roller is the perfect solution.
It fits perfectly into the rim, ensuring consistent contact and pressure during rolling.
The hole in the rim is also unstressed and retains its original shape. 

Contents : 1 x MR33 Tire Roller for Ride FWD Tires (ETS) 36086S